Quantitative Chemistry: revision questions and answers
Test yourself first. Say or write your answer, then tap the question to check it and see why. Free, no sign-up.
Test yourself
State the law of conservation of mass.
Answer: No atoms are lost or made in a chemical reaction, so the mass of products equals the mass of reactants
Why: A reaction just rearranges the atoms you started with into new combinations, and since no atom vanishes or appears from nowhere, the total mass cannot change.
Define relative formula mass.
Answer: The sum of the relative atomic masses of all the atoms shown in a compound's formula
Why: A compound's mass comes from the atoms inside it, so adding up every atom in the formula, including repeats shown by subscripts, gives the mass of the whole unit.
Explain why a metal's mass appears to increase when it reacts with oxygen.
Answer: Oxygen from the air combines with and becomes part of the solid product, adding to the mass
Why: You only weighed the metal at the start, not the invisible oxygen from the air, but that oxygen is now locked into the solid so it shows up on the balance.
(Higher) State the value of the Avogadro constant.
Answer: 6.02 × 10²³ per mole
Why: Atoms are far too tiny to count one by one, so chemists use this huge fixed number of particles as a single countable package called a mole.
Calculate the relative formula mass of sodium chloride, NaCl. (Ar: Na = 23, Cl = 35.5)
Answer: 23 + 35.5 = 58.5
Why: One sodium atom plus one chlorine atom means you simply add their two atomic masses together: 23 plus 35.5 gives 58.5.
Explain what the range of a set of repeated measurements tells you.
Answer: It gives a measure of the uncertainty/spread in the measurements, a larger range means greater uncertainty
Why: If repeats of the same measurement land far apart, something is varying that you cannot control, so you can trust the result less than if they all cluster together.
(Higher) Define limiting reactant.
Answer: The reactant that is fully used up first in a reaction, determining the maximum amount of product possible
Why: Once one reactant is completely used up the reaction has to stop, so that reactant sets the ceiling on how much product you can possibly make, no matter how much of the other you have.
What you need to know
Everything this topic covers, as a checklist. Can you explain each one without your notes?
- State the law of conservation of mass (no atoms are lost or made in a chemical reaction, so product mass equals reactant mass), and understand balanced symbol equations, including the use of a multiplier written in normal script before a formula versus a subscript within a formula.
- Define relative formula mass (Mr) as the sum of the relative atomic masses of the atoms shown in a compound's formula, use it (with the relative atomic masses of the elements involved) to calculate a compound's percentage composition by mass, and know that in a balanced equation, the total relative formula mass of the reactants (in the quantities shown) equals the total relative formula mass of the products.
- Explain apparent mass changes during a reaction where a reactant or product is a gas, e.g. a metal reacting with oxygen appears to gain mass because the oxygen wasn't accounted for, or a metal carbonate's thermal decomposition appears to lose mass because the carbon dioxide produced escapes, explaining these changes using a given balanced symbol equation and the particle model, in non-enclosed systems.
- Understand that any measurement carries some uncertainty, represent the distribution of a set of results, estimate uncertainty, and use the range of a set of measurements about the mean as a measure of that uncertainty.
- Calculate the mass of solute dissolved in a given volume of solution of known concentration, where concentration is measured as mass per given volume (e.g. g/dm³).
Higher tier only
- Define the mole (symbol mol) as the unit for measuring chemical amount, know that the mass of one mole of a substance in grams equals its relative formula mass numerically, and that one mole of any substance contains the same number of the stated particles (atoms, molecules, or ions) as one mole of any other substance: this number being the Avogadro constant, 6.02 × 10²³ per mole.
- Apply mole-based reasoning to atoms, molecules, ions, electrons, formulae, and equations (e.g. recognising that one mole of carbon atoms contains the same number of particles as one mole of carbon dioxide molecules), and use a substance's relative formula mass to convert between mass and number of moles in either direction.
- Interpret a balanced symbol equation in terms of moles (e.g. that
Zn + 2HCl → ZnCl₂ + H₂means one mole of zinc reacts with two moles of hydrochloric acid to produce one mole of zinc chloride and one mole of hydrogen), and calculate the masses of substances shown in a balanced equation, including calculating an unknown reactant or product mass from a given mass elsewhere in the equation. - Balance a symbol equation by converting given reactant and product masses into moles and then into a simple whole-number mole ratio, and rearrange (change the subject of) the mathematical equations involved.
- Explain limiting reactants: in a two-reactant reaction, one reactant is often used in excess to ensure the other is fully consumed, the reactant that runs out first (the limiting reactant) determines the maximum amount of product possible, and explain this effect in terms of moles or masses.
- Explain how a solution's concentration relates to the mass of solute dissolved and the volume of solution it's dissolved in.
Play it as a game
Common mistakes
- Assuming a reaction that appears to "gain" or "lose" mass violates conservation of mass, rather than recognising an unaccounted-for gas is almost always the explanation.
- Confusing relative atomic mass (a single element) with relative formula mass (a whole compound, summing every atom's relative atomic mass in the formula).
- (Higher tier) Treating "mole" as a mass unit rather than an amount-of-substance unit: forgetting that one mole always represents the same fixed number of particles (the Avogadro constant) regardless of what substance it is, even though the mass of one mole differs from substance to substance.
- (Higher tier) Misreading the multiplier in front of a formula in a balanced equation as applying to only the first element, rather than to the whole formula unit it precedes.
- (Higher tier) Assuming the reactant present in the smallest starting mass is automatically the limiting reactant, rather than actually converting each reactant's mass to moles and comparing against the equation's mole ratio.
Key words
Conservation of mass, balanced equation, relative formula mass, mole (HT), Avogadro constant (HT), limiting reactant (HT), concentration, solute, solution.
Mix it up: questions from other topics
Mixing topics helps you remember more. These come from topics that link to this one.
Define isotope.
Answer: Atoms of the same element with the same number of protons but a different number of neutrons
Why: The proton number is what makes an atom a particular element, so you can change the number of neutrons and still have the same element, just a slightly heavier or lighter version of it.
From Atomic Structure and the Periodic TableState the relative mass of a proton.
Answer: 1
Why: Protons and neutrons are the heavy particles in the atom, so we use one proton as the benchmark and measure everything else against it: electrons are so light they barely count.
From Atomic Structure and the Periodic TableName the three types of strong chemical bond.
Answer: Ionic, covalent, metallic
Why: Each one is a different way atoms can share or swap electrons to hold together: giving electrons away makes ionic, sharing makes covalent, and pooling them in a sea makes metallic.
From Bonding, Structure and the Properties of MatterName the group of the periodic table containing the halogens.
Answer: Group 7
Why: Group number tells you the outer shell electrons, and the halogens all have seven, which is why they behave so similarly.
From Atomic Structure and the Periodic TableExplain why ionic compounds conduct electricity when molten but not when solid.
Answer: When molten, the ions are free to move and carry charge; in the solid they are fixed in the lattice
Why: Electricity needs charged particles that can move: in a solid the ions are locked in place in the lattice, but melting breaks the lattice apart and sets them free to travel.
From Bonding, Structure and the Properties of MatterName the carbon structure in which each carbon atom forms three covalent bonds.
Answer: Graphite
Why: Each carbon bonds to three others in flat layers, leaving one electron free, which is why graphite conducts. The layers slide because the forces between the layers are weak.
From Bonding, Structure and the Properties of Matter(Higher) Write a half equation showing bromide ions being converted into bromine.
Answer: 2Br⁻ → Br₂ + 2e⁻
Why: Each bromide ion has one extra electron, so two of them must each let go of one electron to pair up and form a neutral Br2 molecule.
From Atomic Structure and the Periodic TableExplain why substances made of small molecules have low melting points.
Answer: Only the weak intermolecular forces between molecules are overcome, not the strong covalent bonds within each molecule
Why: Melting only pulls whole molecules away from each other, and the forces between molecules are weak, so very little heat energy is needed to separate them.
From Bonding, Structure and the Properties of MatterTeachers
The full lesson for this topic (slides, worksheet, quizzes and more) is on the Quantitative Chemistry topic page.