Speca › Revise › GCSE Geography
Coastal Landscapes in the UK: revision questions and answers
Test yourself first. Say or write your answer, then tap the question to check it and see why. Free, no sign-up.
Test yourself
Define fetch.
Answer: The distance of open water over which the wind blows to generate a wave
Why: Waves get their energy from wind blowing across water, so the further that open stretch of water, the more energy the wind can transfer and the bigger the wave.
Name the three processes of coastal erosion.
Answer: Hydraulic power, abrasion, attrition
Why: Erosion at the coast happens in three ways: the sheer force of the water, loose rocks being thrown at the cliff, and rocks knocking into each other and breaking down.
Explain the difference between mechanical and chemical weathering.
Answer: Mechanical weathering is physical breakdown of rock without a chemical change; chemical weathering is breakdown through a chemical reaction with the rock
Why: In mechanical weathering the rock is still the same stuff, just in smaller pieces, while in chemical weathering something like slightly acidic rainwater actually reacts with the rock and changes what it is made of.
Explain how longshore drift moves material along a beach.
Answer: Swash carries material up the beach at an angle; backwash returns it straight down the beach under gravity; the repeated cycle moves material along the coast
Why: Waves come in at an angle because of the wind, but gravity always pulls the water straight back down the slope, so each wave nudges the pebbles a little further along the coast in a zigzag.
Name one landform created by coastal deposition.
Answer: Any one of: beach, sand dune, spit, bar
Why: Deposition happens where waves lose energy and drop the sand and shingle they were carrying, and that dropped material builds up over time into these features.
Put these in the correct order: arch, cave, stack, crack.
Answer: Crack, cave, arch, stack
Why: Waves attack a weakness in the headland and widen it over time: a small crack is worn into a cave, the cave is cut right through to make an arch, and when the arch roof collapses the leftover pillar is a stack.
Give one benefit and one drawback of groynes.
Answer: Benefit: trap sediment and build up the beach; Drawback: starve beaches further along the coast (downdrift) of sediment
Why: Groynes work by blocking longshore drift, so sand piles up on one side and the beach grows, but that same sand never reaches the coast further along, leaving those beaches thinner and more exposed to erosion.
Name your named UK coastal management scheme.
Answer: Any correctly named UK coastal management scheme, e.g. Mappleton, Holderness Coast
Why: Examiners want a real place you can back up with facts. At Mappleton, on the fast eroding Holderness Coast, rock groynes and a rock armour revetment were added in 1991 to protect the village and the B1242 road.
What you need to know
Everything this topic covers, as a checklist. Can you explain each one without your notes?
- Distinguish constructive and destructive wave types by their characteristic swash/backwash balance, frequency and typical effect on a beach (constructive waves build beach material up; destructive waves erode it), and describe the wave characteristics (height, wavelength, frequency, energy) that determine which type dominates at a given time and place.
- Explain the two weathering processes that break down coastal rock without it being moved: mechanical weathering (physical breakdown, for example repeated freeze-thaw action opening up cracks) and chemical weathering (breakdown through a chemical reaction with the rock, for example rainwater reacting with certain rock types).
- Explain the three mass movement processes by which weathered material moves down a slope or cliff face under gravity: sliding (a block of material moving down-slope along a slip plane), slumping (a rotational movement, often following heavy rain that saturates and weakens the material), and rock falls (fragments breaking away and falling, typically from a steep or vertical cliff face).
- Explain the three coastal erosion processes and how each wears away the coastline: hydraulic power (the sheer force of waves, including compressed air, breaking against rock), abrasion (rock fragments carried by waves scraping and wearing down a surface), and attrition (rock fragments themselves being worn down and rounded as they collide with each other), and be able to distinguish abrasion (wearing the coastline) from attrition (wearing the material being transported).
- Explain longshore drift as the dominant coastal transportation process, describing how the swash/backwash cycle moves material along a beach at an angle determined by prevailing wind and wave direction.
- Explain the circumstances that cause material to settle out along a coastline, linking deposition to a drop in wave energy (for example a sheltered stretch of coast, or a wave carrying more sediment than its remaining energy can keep moving).
- Explain how a stretch of coastline's geological structure (the pattern and orientation of rock layers/bedding, joints and faults) and rock type (its resistance to erosion and weathering) together account for why some sections of coast retreat faster than others and why coastlines can develop an alternating hard-rock/soft-rock (headland and bay) shape.
- Explain the formation of erosional landforms as a sequence of cause and effect: headlands and bays (differential erosion of alternating resistant and less resistant rock), cliffs and wave-cut platforms (undercutting at the base of a cliff leading to collapse and gradual landward retreat, leaving a gently sloping rock platform), and caves, arches and stacks (erosion exploiting a line of weakness in a headland, progressively enlarging a crack into a cave, then a cave into an arch, then collapse of the arch roof leaving an isolated stack).
- Explain the formation of depositional landforms: beaches (material deposited where wave energy is reduced), sand dunes (wind-blown sand trapped and stabilised by vegetation above the high-tide line), spits (longshore drift depositing material past a change in coastline direction, extending out into open water, sometimes with a curved or hooked end where wave direction changes) and bars (a spit that has grown to connect two headlands, cutting off the water behind it to form a lagoon).
- Evaluate the costs and benefits of hard engineering coastal management strategies (sea walls, rock armour, gabions, groynes): what each is physically made of or does, how effectively it protects the coastline, and its typical drawbacks (for example cost, appearance, or effects on neighbouring stretches of coast).
- Evaluate the costs and benefits of soft engineering strategies (beach nourishment and reprofiling, dune regeneration) as lower-impact alternatives that work with natural processes rather than against them.
- Evaluate the costs and benefits of managed retreat / coastal realignment as a strategy of deliberately allowing a stretch of coast to erode or flood rather than defending it, including who gains and who loses from that decision.
Play it as a game
Common mistakes
- Confusing abrasion (erosion of the coastline by material the waves are carrying) with attrition (erosion of that carried material itself), since both involve rock fragments colliding or scraping.
- Assuming erosion, transportation and deposition are three separate topics rather than understanding them as a linked energy story: the same wave-energy conditions that favour erosion in one location favour deposition somewhere else along the same coast.
- Believing headlands and bays form from a single rock type behaving differently in different places, rather than understanding it as differential erosion between alternating bands of more and less resistant rock.
- Misordering the cave, arch, stack sequence, or treating it as a static classification rather than a time-ordered process of progressive erosion and collapse.
- Assuming "hard engineering" is always the most effective or most sustainable option, rather than weighing its higher cost and potential to worsen erosion elsewhere against the lower cost and more limited protection soft engineering and managed retreat provide.
- Treating groynes as purely beneficial, without recognising the common conflict where trapping sediment on one beach starves the next stretch of coast downdrift.
Key words
Fetch, wave energy, constructive wave, destructive wave, swash, backwash, mechanical weathering, chemical weathering, mass movement, sliding, slumping, rock fall, hydraulic power, abrasion, attrition, longshore drift, prevailing wind, geological structure, headland, bay, wave-cut platform, cave, arch, stack, sand dune, spit, bar, hard engineering, soft engineering, managed retreat, sea wall, rock armour, gabion, groyne, beach nourishment, dune regeneration, coastal realignment.
Mix it up: questions from other topics
Mixing topics helps you remember more. These come from topics that link to this one.
Name one factor that affects the risk a natural hazard poses to a population.
Answer: Any one of: population density, level of economic development, monitoring/early-warning systems, climate/physical geography
Why: Risk depends on how many people are exposed to the hazard and how well they can cope with it, so anything that changes exposure or coping capacity changes the risk.
From Natural Hazards OverviewName the three types of plate margin.
Answer: Constructive, destructive, conservative
Why: Two plates can only do three things where they meet: move apart, move towards each other, or slide past each other sideways.
From Tectonic HazardsName one major upland area of the UK.
Answer: Any one of: Scottish Highlands, Southern Uplands, Pennines, Lake District fells, Cambrian Mountains
Why: Upland areas are the high, rugged parts of the UK made of older, harder rock that has resisted erosion, and these are found mainly in the north and west.
From UK Physical Landscapes OverviewName the two responses to a hazard, split by time.
Answer: Immediate response and long-term response
Why: Responses are split by timing because the first priority is saving lives in the hours and days after the event, while rebuilding and preparing better takes months or years.
From Weather HazardsDefine a producer.
Answer: An organism that produces its own food/energy, e.g. through photosynthesis, forming the base of a food chain
Why: Everything else in an ecosystem has to eat something to get energy, so the chain has to start with something that can make its own energy from sunlight.
From EcosystemsWhat is the difference between a primary and a secondary effect?
Answer: A primary effect is a direct, immediate result of the hazard; a secondary effect is a knock-on consequence that follows afterwards
Why: Primary effects are the damage the shaking itself does at the moment it happens, while secondary effects are the problems caused by that damage, like fires or disease, which take time to develop.
From Tectonic HazardsName one natural cause of climate change.
Answer: Any one of: changes in the Earth's orbit, variation in volcanic activity, variation in the Sun's energy output
Why: These are all changes to how much energy the Earth receives or keeps, and they were happening long before humans burned any fossil fuels.
From Climate ChangeTeachers
The full lesson for this topic (slides, worksheet, quizzes and more) is on the Coastal Landscapes in the UK topic page.