Chemical Changes: revision questions and answers
Test yourself first. Say or write your answer, then tap the question to check it and see why. Free, no sign-up.
Test yourself
State what "oxidation" means, in terms of oxygen.
Answer: Gain of oxygen
Why: At Foundation level oxidation is tracked by following the oxygen: the substance that ends up with more oxygen than it started with has been oxidised.
Name the salt formed when hydrochloric acid reacts with sodium hydroxide.
Answer: Sodium chloride
Why: The metal from the alkali pairs with the chloride from hydrochloric acid, and the leftover hydrogen and hydroxide become water.
State the pH value that is neutral.
Answer: pH 7
Why: At pH 7 there is nothing in excess: the amounts of acidic and alkaline particles balance out, as in pure water.
State which electrode positive ions move to during electrolysis.
Answer: The cathode (negative electrode)
Why: Opposite charges attract, so positive ions are pulled towards the negative electrode.
Explain why aluminium is extracted by electrolysis rather than reduction with carbon.
Answer: Aluminium is more reactive than carbon, so carbon cannot displace/reduce it from its oxide
Why: Carbon can only pull oxygen away from metals less reactive than itself, and aluminium holds onto its oxygen too strongly for that.
(Higher) Define oxidation in terms of electrons.
Answer: Loss of electrons
Why: At Higher level we follow the electrons instead of the oxygen, and the particle that hands electrons away is the one being oxidised.
What you need to know
Everything this topic covers, as a checklist. Can you explain each one without your notes?
- Explain that metals react with oxygen to form metal oxides, and that this is oxidation because the metal gains oxygen, with the reverse (loss of oxygen) being reduction.
- Recall and describe the reactions (if any) of potassium, sodium, lithium, calcium, magnesium, zinc, iron, and copper with water and with dilute acids (limited to room temperature, not steam), and place these metals, plus hydrogen and carbon, often included for comparison, in a reactivity series, explaining that a metal's reactivity relates to how readily it forms positive ions, and deducing an order of reactivity from experimental results; know that a more reactive metal can displace a less reactive one from a compound.
- Explain that unreactive metals (e.g. gold) occur naturally as the metal itself, while most metals occur as compounds requiring chemical extraction, and that metals less reactive than carbon can be extracted from their oxides by reduction with carbon (reduction = loss of oxygen): interpreting or evaluating a given metal-extraction process and identifying what's oxidised/reduced in terms of oxygen gain or loss. The detailed extraction processes themselves are not required.
- Describe how acids react with some metals to produce a salt and hydrogen (reactions limited to magnesium, zinc, and iron with hydrochloric and sulfuric acid).
- Explain that acids are neutralised by alkalis (soluble metal hydroxides) and bases (insoluble metal hydroxides/oxides) to form a salt and water, and by metal carbonates to form a salt, water, and carbon dioxide, and that the salt produced depends on the acid used (hydrochloric → chlorides, nitric → nitrates, sulfuric → sulfates) and the positive ion in the base/alkali/carbonate; predict the products of a given acid reaction and use common ion formulae to deduce a salt's formula.
- Describe how to prepare a pure, dry sample of a named soluble salt: adding an insoluble solid (metal, metal oxide, hydroxide, or carbonate) to an acid until no more reacts, filtering off the excess solid, then crystallising the resulting salt solution.
- Explain that acids produce hydrogen ions (H⁺) and alkalis produce hydroxide ions (OH⁻) in aqueous solution, describe the pH scale (0 to 14, measured with universal indicator or a pH probe) with pH 7 neutral, acidic solutions below 7, and alkaline solutions above 7, and describe neutralisation as hydrogen ions reacting with hydroxide ions to form water.
- Describe electrolysis: in a molten or dissolved ionic compound, ions become free to move, making the liquid or solution an electrolyte able to conduct electricity; passing a current makes positive ions move to the negative electrode (cathode) and negative ions move to the positive electrode (anode), where they're discharged to form elements.
- Predict the products of electrolysing a molten binary ionic compound (e.g. lead bromide) with inert electrodes: metal at the cathode, non-metal at the anode.
- Explain why electrolysis, rather than reduction with carbon, is used to extract metals too reactive for carbon reduction or that react with carbon, using aluminium's extraction (electrolysis of molten aluminium oxide and cryolite, with a carbon anode that must be continually replaced) as the worked example, and explain why a mixture (rather than pure aluminium oxide) is used as the electrolyte.
- Predict the products of electrolysing an aqueous solution containing a single ionic compound with inert electrodes: hydrogen at the cathode if the metal is more reactive than hydrogen, and oxygen at the anode unless halide ions are present (in which case the halogen forms instead), explained by water molecules themselves breaking down to supply hydrogen and hydroxide ions available for discharge.
Higher tier only
- Define oxidation as loss of electrons and reduction as gain of electrons; write ionic equations for displacement reactions, and identify which species are oxidised and which are reduced in a given reaction, symbol equation, or half equation.
- Explain acid-metal reactions as redox reactions in terms of electron loss/gain, identifying the oxidised and reduced species in given equations.
- Distinguish strong acids (completely ionised in solution, e.g. hydrochloric, nitric, sulfuric) from weak acids (only partially ionised, e.g. ethanoic, citric, carbonic), and dilute from concentrated (in terms of amount of substance present); explain that for a given concentration, a stronger acid has a lower pH, and that each one-unit drop in pH corresponds to a tenfold increase in hydrogen ion concentration; describe neutrality and relative acidity in terms of hydrogen ion concentration and whole-number pH values.
- Write half equations for the reactions occurring at each electrode during electrolysis (throughout this topic's electrolysis content), and complete/balance supplied half equations: recognising that at the cathode, positive ions gain electrons (reduction), and at the anode, negative ions lose electrons (oxidation).
Play it as a game
Common mistakes
- Confusing oxidation and reduction, particularly forgetting which electrode (or which direction of electron/oxygen transfer) each one corresponds to.
- Assuming "strong acid" means "concentrated acid" (Higher tier): these describe two independent properties: strength is about the degree of ionisation, concentration is about how much acid is dissolved in a given volume.
- Believing pH is a linear scale in terms of hydrogen ion concentration, rather than understanding (Higher tier) each pH unit represents a tenfold change in concentration.
- Mixing up which electrode is the cathode and which is the anode, and consequently which ion type (positive or negative) moves to which.
- Assuming the products of electrolysing an aqueous solution are the same as electrolysing the molten compound, rather than understanding water itself contributes ions that compete with the dissolved compound's own ions.
Key words
Oxidation, reduction, reactivity series, displacement, extraction, salt, neutralisation, pH scale, alkali, base, electrolysis, electrolyte, electrode, cathode, anode, ion, half equation (HT), strong acid (HT), weak acid (HT).
Mix it up: questions from other topics
Mixing topics helps you remember more. These come from topics that link to this one.
Name the group of the periodic table containing the halogens.
Answer: Group 7
Why: All the halogens have seven electrons in their outer shell, and the group number tells you that outer electron count.
From Atomic Structure and the Periodic TableName the three types of strong chemical bond.
Answer: Ionic, covalent, metallic
Why: These three cover the three ways atoms can hold together: transferring electrons, sharing electrons, or pooling them in a sea of delocalised electrons.
From Bonding, Structure and the Properties of MatterState the law of conservation of mass.
Answer: No atoms are lost or made in a chemical reaction, so the mass of products equals the mass of reactants
Why: A reaction only rearranges the atoms that are already there, it never creates or destroys them, so the total mass cannot change.
From Quantitative ChemistryDefine isotope.
Answer: Atoms of the same element with the same number of protons but a different number of neutrons
Why: The proton number fixes which element it is, so changing only the neutrons gives a heavier or lighter version of the same element.
From Atomic Structure and the Periodic TableExplain why metals are good conductors of electricity.
Answer: Delocalised electrons are free to move through the structure, carrying electrical charge
Why: A current is just moving charge, and in a metal the outer electrons are not stuck to one atom so they can drift through the whole structure.
From Bonding, Structure and the Properties of Matter(Higher) State the value of the Avogadro constant.
Answer: 6.02 × 10²³ per mole
Why: It is simply the number of particles chemists have agreed to call one mole, so that counting atoms becomes as easy as weighing them.
From Quantitative ChemistryExplain why substances made of small molecules have low melting points.
Answer: Only the weak intermolecular forces between molecules are overcome, not the strong covalent bonds within each molecule
Why: Melting pulls whole molecules apart from each other, and the forces holding separate molecules together are much weaker than the bonds inside them.
From Bonding, Structure and the Properties of MatterDefine relative formula mass.
Answer: The sum of the relative atomic masses of all the atoms shown in a compound's formula
Why: A formula tells you exactly which atoms and how many, so adding up their individual masses gives the mass of the whole unit.
From Quantitative Chemistry(Higher) Define limiting reactant.
Answer: The reactant that is fully used up first in a reaction, determining the maximum amount of product possible
Why: Once one reactant has run out the reaction simply stops, no matter how much of the other reactant is left sitting there.
From Quantitative ChemistryTeachers
The full lesson for this topic (slides, worksheet, quizzes and more) is on the Chemical Changes topic page.