Speca › Revise › GCSE Science

Particle Model of Matter: revision questions and answers

Test yourself first. Say or write your answer, then tap the question to check it and see why. Free, no sign-up.

Test yourself

State the equation for density.

Answer: ρ = m ÷ V

Why: Density tells you how much mass is squeezed into a given space, so you share the mass out over the volume it occupies.

Define internal energy.

Answer: The total kinetic and potential energy of all the particles that make up a system

Why: Particles are always moving and always pulling on each other, so the energy stored inside a substance is the movement energy plus the energy tied up in those forces, added up for every particle.

Calculate the density of an object with a mass of 10 kg and a volume of 0.0025 m³.

Answer: ρ = 10 ÷ 0.0025 = 4000 kg/m³

Why: Write the equation: density = mass divided by volume. Substitute: 10 divided by 0.0025. Divide through: 4000 kg/m3.

Define specific latent heat.

Answer: The energy needed to change the state of one kilogram of a substance, with no change in temperature

Why: When a substance melts or boils, the energy goes into breaking the particles apart from each other rather than speeding them up, so the thermometer reading stays still while energy pours in.

Explain why gases are much less dense than solids.

Answer: In a gas, particles are widely spaced/far apart, compared with a solid where they are tightly packed

Why: The particles themselves are the same, but in a gas they are spread far apart so far fewer of them fit in the same amount of space.

Explain, using the particle model, why increasing a gas's temperature at constant volume increases its pressure.

Answer: Particles move faster/have more kinetic energy, so they collide with the container's walls more frequently and with greater force

Why: Heating makes the particles move faster, so they strike the walls harder and more often. Pressure is the force on each unit of area of the wall.

Distinguish specific heat capacity from specific latent heat.

Answer: Specific heat capacity is for a temperature change within one state; specific latent heat is for a change of state at constant temperature

Why: One is about making particles move faster, which you can see on a thermometer, the other is about pulling particles apart, which happens at a fixed temperature.

What you need to know

Everything this topic covers, as a checklist. Can you explain each one without your notes?

Higher tier only

None: this topic has no content flagged as Higher-tier-only in the specification; both tiers cover identical requirements here.

Play it as a game

Play the Particle Model of Matter quiz game

Common mistakes

Key words

Density, particle model, internal energy, specific heat capacity, latent heat, specific latent heat, fusion, vaporisation, sublimation.

Mix it up: questions from other topics

Mixing topics helps you remember more. These come from topics that link to this one.

State the equation for gravitational potential energy.

Answer: Ep = m × g × h

Why: Lifting something stores energy in it, and the heavier it is, the stronger gravity pulls, and the higher you lift it, the more energy you have to put in.

From Energy
State the equation linking potential difference, current, and resistance.

Answer: V = I × R

Why: Resistance measures how hard it is to push current through, so to drive a bigger current, or push through more resistance, you need a bigger voltage.

From Electricity
Define potable water.

Answer: Water that is safe to drink

Why: Potable means it will not make you ill, which is not the same as pure: tap water contains dissolved minerals but is still safe to drink.

From Using Resources
Define specific heat capacity.

Answer: The energy needed to raise the temperature of one kilogram of a substance by one degree Celsius

Why: Different substances need different amounts of energy to warm up, so we compare them fairly using a fixed mass of one kilogram and a fixed rise of one degree.

From Energy
Name the component whose resistance decreases as light intensity increases.

Answer: LDR

Why: The name says it: a light dependent resistor changes its resistance with light, letting more current flow when it is bright so a circuit can sense daylight.

From Electricity
State the UK mains supply frequency.

Answer: 50 Hz

Why: The mains alternating current swaps direction back and forth 50 times every second, which is set by how fast the generators in power stations spin.

From Electricity
(Higher) Give one way to increase the efficiency of an intended energy transfer.

Answer: e.g. lubricating moving parts, to reduce energy wasted as heat by friction (accept other valid methods with reasons)

Why: Efficiency rises when less energy escapes in useless ways, so oiling the moving parts cuts friction and stops energy leaking away as heat.

From Energy
(Higher) State the transformer equation.

Answer: Vp × Ip = Vs × Is

Why: A transformer cannot create energy, so for an ideal one the power going in must equal the power coming out: raise the voltage and the current must drop.

From Electricity

Teachers

The full lesson for this topic (slides, worksheet, quizzes and more) is on the Particle Model of Matter topic page.