Speca › Revise › GCSE Geography
Glacial Landscapes in the UK: revision questions and answers
Test yourself first. Say or write your answer, then tap the question to check it and see why. Free, no sign-up.
Test yourself
Name the two processes of glacial erosion.
Answer: Abrasion and plucking
Why: A glacier erodes in two ways: rocks frozen into its base scratch the surface like sandpaper, and meltwater freezes onto rock and rips chunks away as the ice moves on.
What is freeze-thaw weathering?
Answer: Repeated freezing and thawing of water in rock cracks, gradually widening them until the rock shatters into angular fragments
Why: Water expands by about a tenth when it freezes, so every freeze pushes the crack wider and the rock is eventually forced apart.
Distinguish till from outwash.
Answer: Till is unsorted material deposited directly by ice; outwash is sorted material deposited by meltwater
Why: Ice is a solid and simply dumps everything it is carrying in one jumbled heap, but meltwater is a liquid that drops heavy stones first and fine sand later, so it leaves material neatly sorted in layers.
Explain how an arête forms.
Answer: Two corries erode back-to-back into the same mountain, leaving a narrow, knife-edged ridge between them
Why: Each corrie eats backwards into the mountain from its own side, and when two of them meet, all that survives in the middle is a thin sharp wall of rock.
What is an erratic?
Answer: A boulder carried by ice and deposited far from its original source rock type, identifiable because it differs geologically from the local bedrock
Why: Ice can shift boulders for miles, so when a rock sits on bedrock of a completely different type, the only way it could have got there is by being carried and dropped by a glacier.
Explain how a hanging valley forms.
Answer: A smaller tributary glacier erodes less deeply than the larger main glacier, leaving the tributary valley 'hanging' above the main glacial trough, often marked by a waterfall
Why: A bigger glacier has more ice, so it has more power to scrape downwards: the smaller side glacier simply cannot cut as deep, so its valley is left stranded high up the side when the ice melts.
Name one economic activity found in a glaciated upland area.
Answer: Any one of: tourism, farming, forestry, quarrying
Why: Glaciated uplands offer dramatic scenery, thin grass, steep slopes and exposed rock, so people make money from what the land can actually support: visitors, sheep, trees and stone.
Name your named glaciated upland area used for tourism.
Answer: Any correctly named UK glaciated upland area, e.g. the Lake District
Why: Examiners want a real place you can describe, so naming an actual UK upland shaped by ice shows you can tie the landforms you have learned to somewhere on the map.
What you need to know
Everything this topic covers, as a checklist. Can you explain each one without your notes?
- Describe, in outline, how far the ice sheets reached across the UK at the height of the most recent ice age, as the starting context for why glacial landforms exist in some parts of the UK (chiefly upland areas) and not others.
- Explain freeze-thaw weathering as the process by which repeated freezing and thawing of water in rock cracks widens them over time, eventually shattering rock into angular fragments: the main weathering process associated with glacial environments.
- Explain the two glacial erosion processes: abrasion (rock fragments embedded in the base and sides of a glacier scraping and smoothing the underlying rock as the ice moves) and plucking (meltwater freezing onto and around loose rock, which is then pulled away as the glacier continues moving, leaving a jagged, angular surface).
- Explain how glaciers move and transport material, including rotational slip (a glacier moving with a rotational, scooping motion within a hollow, deepening it) and bulldozing (a glacier pushing loose material ahead of it as it advances).
- Explain the circumstances that cause a glacier to lay down its load, distinguishing till (unsorted material deposited directly by the ice itself as it melts) from outwash (sorted material deposited by meltwater flowing away from the ice).
- Explain the formation of erosional landforms: corries (a hollow on a mountainside enlarged by rotational slip and plucking/abrasion, often containing a lake once the ice has melted), arêtes (a narrow, knife-edged ridge formed where two corries erode back-to-back into the same mountain), pyramidal peaks (a pointed summit formed where three or more corries erode around a single mountain), truncated spurs (the blunt, steep ends left where a glacier's straighter, more powerful erosion cuts across the interlocking spurs of a pre-existing river valley), glacial troughs (a steep-sided, flat-floored U-shaped valley formed where a glacier erodes and widens a former river valley), ribbon lakes (a long, narrow lake occupying the floor of a glacial trough, often where the glacier eroded a section of softer or less resistant rock more deeply) and hanging valleys (a smaller tributary glacial valley left "hanging" above the main glacial trough, often marked by a waterfall where it joins, because the smaller tributary glacier eroded less deeply than the main glacier).
- Explain the formation of landforms resulting from transportation and deposition: erratics (individual boulders carried by ice and deposited far from their original source rock type, identifiable because they differ geologically from the local bedrock), drumlins (smooth, elongated mounds of till deposited beneath moving ice, typically found in groups and all aligned in the direction of ice movement) and the different types of moraine (ridges or mounds of till marking where material was carried and deposited by a glacier, for example material carried at the sides, at the front/end, or beneath the ice, each producing a differently positioned ridge).
- Describe the range of economic activities found in glaciated upland areas today, tourism, farming, forestry and quarrying, and explain why each activity is drawn to this type of landscape (for example scenery and outdoor-recreation opportunities for tourism, or exposed rock resources for quarrying).
- Explain the conflicts that can arise between different land uses in a glaciated upland area (for example between farming and tourism, or between quarrying and conservation), and between development pressure and the desire to conserve the landscape's natural or scenic value.
Play it as a game
Common mistakes
- Confusing abrasion (ice-embedded rock scraping the surface beneath it) with plucking (loose rock being pulled away after freezing to the ice), since both are described loosely as "the ice wearing the rock away."
- Assuming a corrie, arête and pyramidal peak are three separate, unrelated landforms rather than understanding them as a single continuum: one corrie, two corries eroding back-to-back, and three-or-more corries around one peak.
- Believing glacial troughs were originally carved from nothing by ice, rather than understanding that a glacier typically widens, straightens and deepens a valley a river had already begun to shape.
- Assuming till and outwash are the same type of deposit, rather than distinguishing unsorted material deposited directly by ice (till) from sorted material deposited by glacial meltwater (outwash).
- Treating glaciated upland land uses (tourism, farming, forestry, quarrying) as independent of one another, rather than recognising that they frequently compete for the same limited land and can directly conflict.
- Assuming glacial processes are still actively shaping the UK's landscape today in the way coastal and river processes are, rather than understanding that UK glacial landforms are relict features from the last ice age being gradually modified by present-day weathering and river action.
Key words
Ice age, freeze-thaw weathering, abrasion, plucking, rotational slip, bulldozing, till, outwash, corrie, arête, pyramidal peak, truncated spur, glacial trough, ribbon lake, hanging valley, erratic, drumlin, moraine, land use conflict, conservation.
Mix it up: questions from other topics
Mixing topics helps you remember more. These come from topics that link to this one.
Name the four processes of fluvial erosion.
Answer: Hydraulic action, abrasion, attrition, solution
Why: Three of them wear away the bed and banks: the force of the water, rocks scraping along, and chemicals dissolving the rock. Attrition is different, it is the carried rocks wearing each other down.
From River Landscapes UKName one landform of coastal deposition.
Answer: Any one of: beach, sand dune, spit, bar
Why: Deposition happens where waves lose energy and drop the sand and shingle they were carrying, so the material piles up into these features.
From Coastal Landscapes UKName one major upland area of the UK.
Answer: Any one of: Scottish Highlands, Southern Uplands, Pennines, Lake District fells, Cambrian Mountains
Why: These are the UK's highest, hardest, oldest rocks in the north and west, which have resisted erosion while the softer rocks of the south and east were worn down.
From UK Physical Landscapes OverviewName one adaptation of an animal or plant to a cold environment.
Answer: Any credible adaptation, e.g. thick fur/blubber for insulation, or a short growing season adaptation in plants
Why: Cold environments mean heat loss and a very short summer, so survival depends on trapping warmth or fitting a whole life cycle into the few weeks when it is warm enough to grow.
From Cold EnvironmentsExplain how a meander forms.
Answer: Faster flow and erosion dominate on the outside of a bend; slower flow and deposition dominate on the inside; this exaggerates the bend over time
Why: Water running round a bend is pushed to the outside, where it flows fastest and cuts the bank away. The slower water on the inside drops its load. Erosion one side, deposition the other, so the loop grows.
From River Landscapes UKName one of the four hazard-reduction strategies.
Answer: Any one of: monitoring, prediction, protection, planning
Why: We cannot stop the plates moving, so the only way to cut deaths is to watch for warning signs, build to survive the shaking, and have people ready to act.
From Tectonic HazardsDefine a decomposer.
Answer: An organism that breaks down dead organic material, returning nutrients to the physical environment
Why: Without something rotting down dead plants and animals, all the nutrients would stay locked in corpses and the soil would run out, so decomposers are what keeps the nutrient cycle turning.
From EcosystemsTeachers
The full lesson for this topic (slides, worksheet, quizzes and more) is on the Glacial Landscapes in the UK topic page.