Atomic Structure (Physics): revision questions and answers
Test yourself first. Say or write your answer, then tap the question to check it and see why. Free, no sign-up.
Test yourself
State the composition of an alpha particle.
Answer: Two protons and two neutrons
Why: An alpha particle is simply a helium nucleus broken off a bigger unstable nucleus, and a helium nucleus is two protons and two neutrons.
Define half-life.
Answer: The time taken for the number of nuclei of an isotope in a sample to halve (or for count-rate/activity to fall to half its initial level)
Why: Decay is random, so we cannot say when one nucleus will go: instead we time how long a whole sample takes to drop to half, which is always the same length of time.
Define isotope.
Answer: Atoms of the same element with different numbers of neutrons
Why: The element is fixed by the number of protons, so you can change the neutron count and still have the same element, just a heavier or lighter version.
State which type of nuclear radiation is stopped by a single sheet of paper.
Answer: Alpha
Why: Alpha particles are big and heavy compared with the other radiations, so they crash into atoms almost immediately and lose their energy within a few centimetres of air or one sheet of paper.
Describe the plum pudding model of the atom.
Answer: A ball of positive charge with negative electrons embedded throughout it
Why: Before the nucleus was discovered, scientists knew atoms contained electrons but had no overall charge, so they pictured the negative bits dotted through a positive blob like fruit in a pudding.
State the unit of activity.
Answer: Becquerel (Bq)
Why: Activity counts how many nuclei decay each second, so its unit is a counting unit: one becquerel is one decay per second.
What you need to know
Everything this topic covers, as a checklist. Can you explain each one without your notes?
- State that atoms have a radius of about 1 × 10⁻¹⁰ m, describe the basic structure of an atom (a positively charged nucleus of protons and neutrons, surrounded by negatively charged electrons), state that the nucleus's radius is less than 1/10,000 of the atom's and holds almost all its mass, and explain that electrons occupy different energy levels (distances from the nucleus), moving to a higher level by absorbing electromagnetic radiation or to a lower level by emitting it.
- Explain that an atom has equal numbers of protons and electrons (giving it no overall charge), define atomic number as an atom's proton count (the same for every atom of a given element) and mass number as the total protons plus neutrons, define isotopes as atoms of the same element with different neutron numbers, and explain that an atom becomes a positive ion by losing one or more outer electrons: relating differences between isotopes to differences in their conventional identity/charge/mass notation.
- Describe how the model of the atom changed as new evidence emerged, from an indivisible sphere, to the "plum pudding" model (a ball of positive charge with embedded electrons) after the electron's discovery, to the nuclear model (mass concentrated in a small, charged central nucleus) following the alpha particle scattering experiment, to Niels Bohr's model of electrons orbiting at fixed distances, followed by the discovery of the proton and, roughly 20 years after the nuclear model itself became accepted, Chadwick's evidence for the neutron, explaining why the scattering experiment's evidence specifically forced the shift from the plum pudding to the nuclear model. Experimental details behind Bohr's and Chadwick's work are not required.
- Explain that some atomic nuclei are unstable and undergo radioactive decay, a random process emitting radiation as the nucleus becomes more stable, define activity (the rate a source of unstable nuclei decays, measured in becquerel, Bq) and count-rate (the number of decays a detector, e.g. a Geiger-Müller tube, records per second); describe the four types of nuclear radiation: alpha (α, two protons + two neutrons, equivalent to a helium nucleus), beta (β, a high-speed electron ejected as a neutron converts to a proton), gamma (γ, electromagnetic radiation from the nucleus), and neutron (n), knowledge of alpha/beta/gamma properties is limited to penetration through materials, range in air, and ionising power; apply this knowledge to evaluate the most suitable radiation source for a given use.
- Use the standard symbols for alpha and beta particles to write and balance nuclear equations representing single alpha or beta decay, balancing atomic and mass numbers only (identifying the resulting "daughter" element is not required); explain that alpha decay reduces both a nucleus's mass and charge, beta decay increases charge without changing mass, and gamma emission changes neither mass nor charge.
- Explain that radioactive decay is random, define half-life as the time for the number of an isotope's nuclei in a sample to halve (equivalently, the time for count rate or activity to fall to half its initial level), explain how half-life relates to decay's random nature, and determine a given isotope's half-life from supplied information.
- Define radioactive contamination as the unwanted presence of radioactive material on another material (with hazard level depending on which radiation type the contaminant emits) and irradiation as exposing an object to nuclear radiation without that object itself becoming radioactive; compare the hazards of contamination and irradiation, describe the precautions needed against irradiation-source hazards, and explain why publishing and peer-reviewing findings on radiation's effects on humans matters.
Higher tier only
- Calculate the net decline, expressed as a ratio, in a radioactive emission after a given number of half-lives.
Play it as a game
Common mistakes
- Assuming irradiation makes an object radioactive, rather than understanding irradiation is exposure to radiation without the object itself becoming a radiation source: contamination is the scenario where radioactive material is actually present on/in something.
- Believing half-life means "the time for a sample to completely decay," rather than understanding it's specifically the time for the remaining amount (or activity/count-rate) to halve: repeatable indefinitely, never reaching exactly zero.
- Getting alpha and beta decay's mass/charge effects backwards, particularly forgetting alpha decay changes both mass and charge, while beta decay changes only charge, not mass.
- Assuming all three radiation types (alpha, beta, gamma) are equally penetrating or equally ionising, rather than understanding they sit on an inverse scale: alpha is the most ionising but least penetrating, gamma the reverse.
- (Higher tier) Miscalculating the ratio after multiple half-lives by adding instead of successively halving: e.g. assuming 3 half-lives means 3/2 of the original remains lost, rather than correctly working out 1/8 remaining.
Key words
Nucleus, proton, neutron, electron, atomic number, mass number, isotope, radioactive decay, activity, count-rate, alpha particle, beta particle, gamma ray, half-life, contamination, irradiation.
Mix it up: questions from other topics
Mixing topics helps you remember more. These come from topics that link to this one.
State the equation for kinetic energy.
Answer: Eₖ = ½ × m × v²
Why: Kinetic energy depends on how heavy something is and how fast it moves, and speed counts twice because doubling the speed gives four times the energy.
From EnergyState the equation linking potential difference, current, and resistance.
Answer: V = I × R
Why: Resistance measures how hard it is to push charge through, so the bigger the current you want, the bigger the push (voltage) you need.
From ElectricityState the equation for density.
Answer: ρ = m ÷ V
Why: Density is about how much mass is packed into a space, so you share the mass out over the volume it fills.
From Particle Model of MatterState the equation for efficiency in terms of useful output and total input energy transfer.
Answer: efficiency = useful output energy transfer ÷ total input energy transfer
Why: Efficiency asks what fraction of the energy you put in actually did the job you wanted, so you compare the useful part with the whole lot.
From EnergyExplain why total resistance increases when resistors are added in series.
Answer: Total resistance is the sum of the individual resistances, so adding another resistor increases the total
Why: In series the charge has to pass through every resistor one after another, so each extra one adds another obstacle to get through.
From ElectricityExplain, using the particle model, why temperature does not change during a change of state.
Answer: The energy supplied changes the internal energy by breaking/forming bonds between particles, rather than increasing their kinetic energy
Why: Temperature tells you how fast the particles are moving, and during melting or boiling the energy goes into pulling particles apart instead of speeding them up.
From Particle Model of MatterState the equation for gravitational potential energy.
Answer: Eₚ = m × g × h
Why: Lifting something stores energy, and it takes more energy the heavier the object, the stronger gravity is and the higher you lift it.
From EnergyDefine electric current, and state its unit.
Answer: The rate of flow of electrical charge; measured in amperes
Why: Current is not a thing but a flow, so it measures how much charge passes a point each second.
From ElectricityDefine specific latent heat.
Answer: The energy needed to change the state of one kilogram of a substance with no change in temperature
Why: It is a fair way to compare substances: the energy needed just to break or form the bonds in one kilogram, with none of it going into heating the substance up.
From Particle Model of MatterTeachers
The full lesson for this topic (slides, worksheet, quizzes and more) is on the Atomic Structure (Physics) topic page.