The Rate and Extent of Chemical Change: revision questions and answers
Test yourself first. Say or write your answer, then tap the question to check it and see why. Free, no sign-up.
Test yourself
Give the equation for calculating mean rate of reaction from a mass of product formed.
Answer: mean rate = quantity of product formed ÷ time taken
Why: A rate is always an amount divided by a time, so measuring how much product appears and dividing by how long it took tells you how fast the reaction went.
Define a catalyst.
Answer: A substance that changes the rate of a reaction without being used up itself
Why: A catalyst joins in and comes back out again unchanged at the end, so the same small amount can keep working on batch after batch.
Explain how a catalyst increases reaction rate.
Answer: By providing an alternative reaction pathway with a lower activation energy
Why: Lowering the activation energy means a far bigger share of the colliding particles now have enough energy to react, so more collisions are successful.
Define equilibrium in a closed system.
Answer: The point where the forward and reverse reactions occur at exactly the same rate
Why: Products are being made and broken back down at exactly the same speed, so the amounts of everything stay constant even though both reactions are still running.
State one factor that increases the rate of a gas reaction, other than temperature or a catalyst.
Answer: Concentration OR pressure
Why: Packing more particles into the same space means they bump into each other more often, so there are more successful collisions every second.
(Higher) State Le Chatelier's Principle.
Answer: If a system at equilibrium is subjected to a change in conditions, the system responds to counteract that change
Why: The equilibrium shifts in whichever direction partly undoes what you did, so squeezing or heating a system pushes it to relieve that squeeze or soak up that heat.
What you need to know
Everything this topic covers, as a checklist. Can you explain each one without your notes?
- Calculate the mean rate of a reaction from the quantity of reactant used or product formed (measured as mass in grams or volume in cm³) over a given time, using
mean rate = quantity of reactant used ÷ time takenormean rate = quantity of product formed ÷ time taken, with units g/s or cm³/s. - Draw and interpret graphs of reactant used or product formed against time, and draw a tangent to the curve to use its slope as a measure of reaction rate at that point.
- Recall how each of the following affects reaction rate: concentration of reactants in solution, pressure of reacting gases, surface area of solid reactants, temperature, and the presence of a catalyst.
- Explain, using collision theory, that a reaction only occurs when particles collide with at least the activation energy, and that increasing concentration, gas pressure, or solid surface area increases collision frequency (and so rate), while increasing temperature increases both collision frequency and how energetic those collisions are (so has a larger effect on rate); predict and explain rate effects from changes in these conditions, including reasoning about surface-area-to-volume ratio for solid reactants, and apply simple proportional reasoning to collision-theory explanations.
- Explain that a catalyst changes a reaction's rate without being used up, that different reactions need different catalysts (with enzymes as biological catalysts), and that a catalyst works by providing an alternative reaction pathway with a lower activation energy; identify a catalyst from its effect on rate and from its absence in the reaction's own chemical equation, and explain catalytic action in terms of activation energy: knowledge of specific catalyst names beyond those named in the specification is not required.
- Describe a reversible reaction (where products can react to re-form the original reactants, written A + B ⇌ C + D) and explain that changing the conditions can change the direction the reaction favours.
- Explain that if a reversible reaction is exothermic in one direction, it's endothermic in the other, transferring the same amount of energy either way.
- Define equilibrium, in a closed system, as the point where the forward and reverse reactions occur at exactly the same rate.
Higher tier only
- Calculate the gradient of a tangent to a reactant-used/product-formed-against-time graph, as a measure of reaction rate at that specific moment; and use quantities in moles (rate in mol/s), rather than mass or volume, for rate calculations at this tier.
- Explain, via Le Chatelier's Principle, that a system at equilibrium responds to any change in conditions by shifting to counteract that change, and that the relative amounts of reactants and products at equilibrium depend on the reaction conditions; make qualitative predictions about how a change affects a system at equilibrium, given appropriate information.
- Predict, from given data, the effect of a concentration change on a system at equilibrium: increasing a reactant's concentration shifts the system to form more product; decreasing a product's concentration shifts the system to form more product from the remaining reactants, in both cases until equilibrium is re-established.
- Predict, from given data, the effect of a temperature change on a system at equilibrium: raising temperature increases the relative amount of product for an endothermic reaction but decreases it for an exothermic one; lowering temperature has the opposite effect in each case.
- Predict, from given data, the effect of a pressure change on a gaseous system at equilibrium: increasing pressure shifts equilibrium toward the side with fewer molecules (per the reaction's symbol equation); decreasing pressure shifts it toward the side with more molecules.
Play it as a game
Common mistakes
- Believing a catalyst is "used up" or becomes part of the products, rather than understanding it's chemically unchanged at the end of the reaction and works by lowering activation energy, not by being consumed.
- Confusing what raises collision frequency (concentration, pressure, surface area) with what raises both collision frequency and collision energy (temperature): leading to an incomplete explanation of why temperature has a particularly strong effect on rate.
- Assuming a reversible reaction "stops" at equilibrium, rather than understanding both the forward and reverse reactions are still happening continuously, just at equal rates: a dynamic, not static, balance.
- (Higher tier) Applying Le Chatelier's Principle backwards: e.g. assuming increasing a reactant's concentration shifts equilibrium away from forming more product, rather than toward it (the system counteracts the change by using up the extra reactant).
- (Higher tier) Forgetting that pressure changes only meaningfully shift equilibrium when the two sides of a gaseous reaction have different numbers of molecules, if both sides have the same number, pressure changes don't shift the equilibrium position.
Key words
Rate of reaction, collision theory, activation energy, catalyst, reversible reaction, equilibrium, Le Chatelier's Principle (HT), tangent, gradient (HT).
Mix it up: questions from other topics
Mixing topics helps you remember more. These come from topics that link to this one.
Name the three types of strong chemical bonding.
Answer: Ionic, covalent, and metallic
Why: These three are the ways atoms can share or transfer their outer electrons to hold themselves together, and every compound you meet is built from one of them.
From Bonding, Structure and Properties of MatterDefine oxidation in terms of oxygen.
Answer: A reaction in which a substance gains oxygen
Why: The simplest way to spot oxidation is to compare before and after: if oxygen has been added to the substance, it has been oxidised.
From Chemical ChangesDefine activation energy.
Answer: The minimum amount of energy needed for a reaction to happen
Why: Particles that bump into each other gently just bounce apart, so there is an energy threshold they must reach before the collision can actually break bonds and start a reaction.
From Energy ChangesDefine atomic number.
Answer: The number of protons in an atom, which is the same for every atom of a given element
Why: The proton number is what defines the element: change it and you have a different element altogether, so it works like an ID number.
From Atomic Structure and the Periodic TableState the law of conservation of mass.
Answer: No atoms are lost or made in a chemical reaction, so the mass of the products equals the mass of the reactants
Why: A reaction only rearranges the atoms you started with into new combinations, and since no atoms vanish or appear, the total mass cannot change.
From Quantitative ChemistryDefine an exothermic reaction.
Answer: A reaction that transfers energy to the surroundings, raising their temperature
Why: Energy that leaves the reaction has to go somewhere, so it passes into the surroundings and you feel the beaker get warmer.
From Energy ChangesName the electrode where reduction occurs during electrolysis.
Answer: The cathode (negative electrode)
Why: Positive ions are pulled to the negative electrode, where they pick up electrons, and gaining electrons is what reduction means.
From Chemical Changes(Higher) State the rule for deciding whether a reaction is exothermic or endothermic using bond energies.
Answer: If more energy is released forming bonds than is needed to break them, the reaction is exothermic; if the reverse is true, it is endothermic
Why: Breaking bonds uses energy up and making bonds gives energy out, so whichever of the two is bigger decides if the reaction overall releases heat or absorbs it.
From Energy ChangesExplain why substances made of small molecules usually have low melting and boiling points.
Answer: Only the weak intermolecular forces between molecules are overcome on melting/boiling, not the strong covalent bonds within them
Why: The strong bonds inside each molecule stay intact when it melts: all you have to do is pull the separate molecules apart, and the forces between them are weak.
From Bonding, Structure and Properties of MatterTeachers
The full lesson for this topic (slides, worksheet, quizzes and more) is on the The Rate and Extent of Chemical Change topic page.